Silicone Fluid Emulsion 60
Silicone Fluid Emulsion 60 RXSOL is a 60 percent emulsion of medium viscosity polydimethylsiloxane, using a nonionic surfactant system. It has been designed for use in many applications including automotive care, polishes, industrial release and textile lubricants.
Silicone Fluid Emulsion 60 RXSOL is a 60% emulsion of medium viscosity polydimethylsiloxane, using a nonionic surfactant system. It has been designed for use in many applications including automotive care, polishes, industrial release and textile lubricants. Silicone Fluid Emulsion 60 is designed to allow formulators to prepare a range of different strength products, from a single feedstock, to exact customer requirements, by simply mixing with water in the appropriate ratio. Stable emulsions down to 15% solids are easily prepared to order, using standard paddle or propeller stirrers.
- As ingredient in polishes, Silicone Fluid Emulsion 60 Rx is used to provide good gloss with minimum smear in both car and furniture polish formulations
-
Mould release of: Rubber or plastic parts (stoppers, screw tops, bungs, etc.) Release agent for manufacturing rubberized belts.
Release agent in printing industry. - Lubrication of Extruded rubber parts conveyor belts. Lubricant to prevent wear & increase abrasion resistance to latex rubber.
- Textile lubricant: Yarn manufacture Sewing thread lubrication
- Hosiery manufacture
- Sewing needle lubrication, Lubricant for sewing threads & yarn to eliminate friction & tension.
- Glass fabric exhaust filters
- Rubber Goods such as Rubber Parts, Bands, Mats, Tube etc.
- Tyre Manufacturing, Tire shine & auto detailing fluid.
- Foundries
- Surgical gloves
- Chappals, Soles and heels
- Latex Manufacturing
- Plastic release
- In Cold tyre remolding process
- Release of concrete products.
- Non-flammable silicone lubricant-excellent alternative to solvent based formulations.
-
Provides finish & improves water repellency for leather, vinyl & foam upholstery.
-
Gives excellent dry soft handle to the fabric.
-
Treated synthetic fabric have crispy handle.
| Composition | Polydimethyl Silicone & biodegradable surfactants |
| Appearance | Off-white to Milky White emulsion Liquid |
| Viscosity by B5 Cps | 500-1500 |
| % Solid content | 62 - 66 |
| pH of neat | 6 - 8 |
| Specific Gravity | 0.97 – 0.99 |
| Solubility | Water soluble Dispersible |
| Ionic nature | Non-ionic |
| Compatibility | With most finishing agents & adjunct auxiliaries |
Dilution of Silicone Fluid Emulsion 60 RXSOL
- Silicone Fluid Emulsion 60 RXSOL : 66.7 Kgs
- Water (Demineralized) : 33.3 Kgs
TOTAL : 100 Kgs
Adjust pH to 5.5~6.0 with acetic acid
Procedure:
· Take 66.7 Kgs of Silicone Fluid Emulsion 60 RXSOL in a clean 100 kgs capacity SS vessel.
· Add 33.3 kgs. of demineralized water slowly to the product under stirring & stir for 5 mins till homogeneous.
· Adjust the pH of the product to 6.0 ± 1.0 with acetic acid if required.
· Filter through cloth & pack.
Applications:
1. As Mould release agent:
Should be diluted to 0.5 to 1% with water, and are generally sprayed on to the hot moulds with a spray gun. In the spraying process the finest possible mist must be produced to avoid formation of spot. Aqueous emulsion cannot be used for cold moulds or for the painting of compounds. In such a case, we recommend our another product Mould Release-CL which is a non aqueous product.
1. By PAD process:
As a softener
- Silicone Fluid Emulsion 60 RXSOL : 5 - 15 g/l
- Wet pick up : 70 - 80%
- Drying
- Curing : 170ºC for 45 secs
Silicone Fluid Emulsion 60 manufacturer, exporter and supplier in Mumbai, Gandhidham, Chennai, Visakhapatnam, Kolkata, Surat, Fujairah, Sharjah, Abudhabi, Dubai, Muscat, Oman, CANADA BC
Handling Precautions: Safety information required for the safe use of this product is not included. Before handling the product read the product Safety Data Sheet which provides information for its safe use and physical and health hazard information. The Material Safety Data Sheet is available thorugh email.
Product Life and Storage: This product may be stored up to six months in a sealed container. Containers should be stored in a cool, dry area. Extended storage at elevated temperatures or exposure to direct heat or sunlight could reduce product life. Keep containers sealed when not in use.
Packing: 50 & 200 kg HMHDPE containers.
Silicone Fluid Emulsion 60 RXSOL is recommended as a mould releasing agent in rubber industries. It can be used as universal release agent in rubber processing. Furthermore, the emulsion is suitable best for the formulation of paint and vinyl conditioners. The active agent contained supports an easy polishing of the conditioner formulations and improves the brightness. It is a specially modified emulsion of poly dimethyl siloxane to give dry, crispy feel to the fabrics especially to synthetics.
