Safe Scale Remover with Indicator
Product Qty Per Unit:
25.00
Product usage unit:
Ltr.
Product Delivery Locations:
Mumbai, JNPT, Nhava Seva, Pirpav Jetty, Ballard Pier, Mumbai Port Trust, Butcher Island, ONGC EMR Shed, MIdc, Pune, Maharastra
Generic Name:
Descaling Chemical with Colour Indicator
Safe scale Cleaner with end point colour Indicator
Product Description:
Safe scale Cleaner with end point colour Indicator. Low Foaming Solution. Safely removes scale from cooling towers, pipes, Boilers, Calorifiers, Heat exchanges, diesel engine cooling system, Condensers, Evaporators & other types of equipment where rust & scale form without system shutdown
It Effectively Removes Scale, Heavy Slime and Algae from surface. RXSOL 555 is an inhibited phosphoric acid descaler which is much safer and non-fuming. Also safe on paint.
Product Application:
Typically 3% concnetrated solution of RXSOL-22-2210-200 ( 3 Ltr for each 100 liters ) of system circulate in system to operate normally for 24-48 hours with the bleed line turned off, then drain the whole system. Repeat 2 or 3 times the normal rate to dilute unused RXSOL-22-2210-200.
RXSOL-22-2210-200 is colour coded. When first added to the system, the system water will be red in colour. As RXSOL-22-2210-200 works at dissolving scale, it will change to yellow. When this happens, simply add more RXSOL-22-2210-200 to the system until the system water is red again, then allow the system water to circulate process until the system water just remains red.
Product Procedure:
Product Note:
Product Technical Specification:
Product pack size:
25 / 210 Ltrs
Product alias:
<p>
Hydrox safe scale remover</p>
Safe Scale Remover with Indicator Manufacturer, Exporter and supplier in Mumbai, Kandla Gandhidham, Chennai, Ennore, Kolkata Haldia, Visakhpatnam, Turbha Navi Mumbai, Paradip, Fujairah, Sharjah, Ajman, Abudhabi, Dubai, UAE Middle East, Ruwi BARKA, Muscat Barka Sohar Oman, Yemen, Sudan, Nairobi Kenya Africa, Canada
Remarks:
Before using this product, check its suitability on galvanised surfaces by making a 50/50 solution with water and dabbing on a non-critical surface. If no discolouration accurs, it is safe to continue.
