ECO Safe Descaler
An organic acid liquid descaler designed to effectively remove calcium carbonate, mineral scale, rust and metal oxides from heat exchangers, piping and process equipment, with controlled compatibility for stainless steel, titanium and NBR gasket syst
- Calcium carbonate scale
- Magnesium deposits
- Hard-water scale
- Mineral deposits
- Light iron oxide/rust deposits
- Metal oxides
- Inorganic deposits
- Carbonate-based deposits
- Calcium carbonate
- Magnesium carbonate
- Mineral scale
- Iron deposits
- Water-scale deposits
- Hard-water deposits
- Carbonate scale
- Iron oxide
- Mineral deposits
- Heat exchangers
- Cooling-water circuits
- Chillers
- Condensers
- Cooling coils
- Pumps
- Piping
- Valves
- Tanks
- Process vessels
- Heat-transfer surfaces
- Water circulation systems
| Property | Typical Value |
|---|---|
| Appearance | Clear to slightly hazy liquid |
| Colour | Colourless to pale yellow |
| Odour | Mild acidic |
| Chemical nature | Organic acid |
| pH, neat product | Typically <2 |
| Specific gravity @ 20°C | Approx. 1.12-1.18 |
| Solubility in water | Completely miscible |
| Flash point | Not applicable / non-flammable aqueous formulation |
| VOC | Very low |
| Chloride | Typically negligible, subject to raw materials |
| Foaming | Moderate Foaming |
| Boiling point | Approximately near that of aqueous solution |
| Corrosion Inhibitor | Specialized corrosion inhibitor addition |
| Shelf life | Typically 24 months in unopened original container |
This descaling liquid contains special quaternary corrosion inhibitors which prevent excessive corrosion in the systems provided other parameters are followed. RXSOL ECO Safe Descaler is not a normal descaling liquid: this corrosion inhibitor and other wetting agents provide essential features to this descaling liquid.
- Effective against carbonate and mineral scale
- Effective against calcium and magnesium deposits
- Can assist in removal of iron oxide/rust deposits
- Chelating action on dissolved metal ions
- Lower volatility than hydrochloric acid
- Chloride-free formulation
- Suitable for circulation or immersion cleaning
- Suitable for many stainless-steel systems
- Suitable for use with PTFE components
- Can be formulated with corrosion inhibitor for improved protection of susceptible metals
- Water soluble
- Easy post-cleaning rinsing
- Suitable for industrial heat-exchanger and equipment cleaning
- Dissolves up to 1.5 kg of scale per gallon – powerful performance
- No heating required – effective even in cold conditions
- Can be used in-operation – reduces shutdown and labor costs
- Non-combustible and safe – easy handling and storage
- Removes rust and scale – ideal for boilers, exchangers, and cooling systems
- No tar oils or toxic cresols – safer for environment and users
Material Compatibility:
| Material | Recommendation |
|---|---|
| SS 304 | Generally suitable |
| SS 304L | Generally suitable |
| SS 316 | Preferred |
| SS 316L | Preferred |
| SS 321 | Suitable after testing |
| SS 347 | Suitable after testing |
| Carbon Steel | Use only for very less time otherwise pitting may occur |
| Mild Steel | Use only for very less time otherwise pitting may occur |
| Cast Iron | Use only for very less time otherwise pitting may occur |
| Copper | Use only for very less time otherwise pitting may occur |
| Brass | Generally avoid |
| Bronze | Testing required |
| Aluminium | Avoid unless specifically validated |
| Aluminium alloys | Alloy-specific testing required |
| Galvanized Steel | Acid attacks zinc coating |
| Zinc | Rapid acid reaction possible |
| Titanium | Generally excellent |
| Hastelloy | Generally suitable |
| Nickel alloys | Alloy-specific confirmation recommended |
| PTFE | Generally suitable |
| PVDF | Generally suitable |
| PVC | Verify temperature |
| PP | Generally suitable |
| HDPE/PE | Generally suitable |
A compatibility chart should not be interpreted as "ECO Safe Descaler can be left indefinitely in the equipment."
For example, stainless steels are generally very resistant to ECO Safe, but temperature and chloride contamination can change the corrosion risk. The British Stainless Steel Association specifically notes that chloride contamination can cause pitting and that higher temperatures may require more corrosion-resistant stainless grades.
ECO Safe Descaler Liquid is considered safe on elastomers like NBR , Buna-N. Note that elastomer contact time and temperature are exrtemely crucial to prevent swelling on gaskets.
ECO Safe Descaler Liquid Manufacturer and supplier in Visakhapatnam Vizag Andhrapradesh, Chennai Ennore Tamilnadu, Kolkata Haldia West Bengal, Gandhidham Surat Gujrat, Mumbai Pune Maharastra, Fujairah UAE Middle East, Dubai, Ajman, Abudhabi, Sharjah, Doha Qatar, Sudan, Kuwait, Muscat Barka Sohar Oman, Yemen, Nairobi Kenya Africa
Click here to get Marine Shipping and Oil Field Maintenance Chemicals... http://rxmarine.com/Engine-room-and-deck-cleaning-marine-chemicals-manufacturer-supplier-India-Middle-East-UAE-Oman\
Fast-acting descaler developed to dissolve mineral scale, rust, and water deposits from boilers, heat exchangers, pipelines, and water-cooled equipment. It enhances plant efficiency, lowers maintenance costs, and minimizes downtime — all without requiring heat during cleaning. This non-combustible, non-flammable formula is safe to handle and can even be used while equipment is in operation. Highly effective against calcium carbonate buildup with minimal manpower. Not recommended for aluminum surfaces.
Which is the best Heat Exchanger Copper Tube Descaling Solution?
