Oil Spill Dispersant Type-III 210 Ltrs

FREE SHIPPINGFree shipping on all orders over 100000 INR.

Oil Spill Dispersant Type-III 210 Ltrs

0
No votes yet

Product Qty Per Unit: 
210.00
Product usage unit: 
Ltr.

Negotiate Price

Product Delivery Locations: 
Mumbai, JNPT, Nhava Seva, Pirpav Jetty, Ballard Pier, Mumbai Port Trust, Butcher Island, ONGC EMR Shed, MIdc, Pune, Maharastra
Category: 
Oil Spill Chem & Absorbent -17
Generic Name: 
This product is specially designed for complete emulsification of oil by which dispersion takes place .
Product Description: 

It is a bio-degradable low toxic product with excellent efficiency of oil dispersant nature . This product is specially designed for complete emulsification of oil by which subsequent dispersion takes place.
 

RXSOL-17-1047-210 Emulsifier  based product with excellence  efficiency and low toxicity with superior penetrating & surface active agents . This product is specially designed for complete emulsification of oil by which dispersion takes place .

AREA: At SEA , at shore either in port or off board , for industrial purpose.

Procedure Of  Use:-

Oil-Spills-at-Sea                                                                                                                                                                    
RXSOL-17-1047-210   is used concentrated  by  direct spraying to clean up oil spills at sea . It  can  be  applied  by hand spray, work boats with  mounted  spray booms , or  fire  hoses  with  injectors. Allow  some  time  for  the  oil to  absorb the   RXSOL-17-1012-SB   and  then  disperse  mixture   by vigorous   agitation   using   Fire   hoses ,   Ship's propeller, Breaker boards towed  behind work boats ,  etc .

Oil - On - Beaches - And - Shore - Line
RXSOL-17-1012-SB   should  be applied  neat by spraying over oiled areas. Allow time for the oil to  absorb  the DISPERSANT then follow by washing down the beach or rocks, etc. The treatment  rate  depends on the  nature  and  thickness of  the oil spill, also on  the age and condition. Under conditions where it is  a  thin slick of oil, 1 litre of  RXSOL-17-1047-210 is enough to treat approximately 20-30 Sq.M of oil. In many cases, several applications  may be necessary. (Depends on the size of contamination in the affected area )

Oil Spill On Deck
Remove as much of the oil as possible, then spray  RXSOL-17-1047-210 over area covered by the oil  &  allow some time for it to be absorbed. Disperse the mixture with water by means of a fire hose Depending on type of oil it may be necessary to use several applications.

Product Application: 

Oil spills at sea, harbours, beaches, or on land. Can also be used in industries.

RXSOL-17-1047-210 is particularly effective over a broad range of oil spill conditions especially in areas which require exceptionally low toxicity. These include
 
  • Floating oil on harbours, coastal water and inland waterways.
  • Oil spills on ship decks, docks, piers beaches and land.
  • Oil accumulation on pilings and dock support structures.
 
 
 
It is designed to quickly and easily disperse and eliminate the risk of pollution, fire and slippery hazards caused by the accidental spillage of oil.
 
Application:
 
RXSOL-17-1047-210 is ready for application directly from the barrel land can applied by pressure spray ejector nozzle jet, mopping or brushing in to oily surfaces.
 
Spraying :
 
For oil spills on water, decks, docks and beaches the most economical results are obtained by the following procedure :
 
  1. Thoroughly wet the oil by spraying OIL SPILL DISPERSANT Type III through a pressure device.Keep the spray moving in a progressive pattern so as to avoid washing the product.
  2. Allow the OIL SPILL DISPERSANT to combine with the oil for 15 to 30 minutes.
  3. Then emulsify the mixture by agitating it with a fire jet spray of salt or fresh cold water. On water the propeller action of a launch is also effective for agitating the mixture. (Agitation is most important for efficient usage).
 
Ejector Nozzle Jet :
 
For large oil spills which must be dealt with quickly. It is advisable to use an ejector nozzle attached to a fire house. The ejector nozzle draws the OIL SPILL DISPERSANT Type III into the jet stream when is then directed at the oil-spill in a progressive pattern. The force of the jet ensures agitation.
 
 
 
Mopping & Brushing :
 
If spraying equipment is not available or for small spills on ships decks, docks, and piers the following method can be used. Pour OIL SPILL DISPERSANT Type III on the oil spill and mix thoroughly with a mop, broom or brush. Then add salt water or fresh water and continue mixing. When the oil is completely emulsified, nose with water. Also for removing accumulations of oil from pilings and dock support structures scrubbing with a large stiff brush may be necessary after first trying the spray method.
Product Procedure: 
Product Note: 
Product Technical Specification: 

Product pack size: 

Product alias: 
<p> Oil Emulsifier dispersant</p>

Oil Spill Dispersant Type-III manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Oil Spill Dispersant Type-III at a competitive price from us. We have ready stock of Oil Spill Dispersant Type-III in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Remarks: 

  • MUMBAI PORT NHAVA SEVASupply can be done within 1 Hour for BPT-Nhava.
  • Mumbai JNPT Ship Chandler50% Discount on every Marine chemical purchase.
  • Largest Marine CHEM SupplierStock Turbha, KANDLA, Vizag, Kolkata, Chennai.
  • Email Price, MSDS, Tech supportmarinechemical @ gmail.com
Top Rated Products