MURIATIC ACID USED FOR CONCRETE CLEANING SUPPLIER IN MUMBAI, MASJID BUNDER, NHAVA SHEVA PORT.

Muriatic Acid is a solution of Hydrogen Chloride (HCl) in water also known as Hydrochloric Acid or Fuming Hydrochloric Acid. Muriatic Acid plays very important roel during cement cargo hold cleaning.  As the muriatic acid comes into contact with concrete, it reacts and produces calcium carbonate a powder residue. The residue can be renoved by rinsing with the water.

The Following is the procedure which is carried out while cleaning the concrete surface.

Step 1

Spray muriatic acid on entire cement covered area.including sidewalk or driveway. Do not let the liquid content evaporate fully from surface. Wait for a day with no wind so you do not run the risk of acid spatters. Follow the precaution instructions and guidance on how to mix it with water. In general, you must use plastic bucket.

Step 2

Test the acid on an inconspicuous portion of the concrete to make sure it won't damage the surface.

Step 3

Dip the masonry brush into the bucket. Scrub it into the concrete. If the stains don't lift right away, dip the brush back into the bucket and apply some of the acid solution onto the concrete. Let it sit on the stains for no more than five minutes. Then scrub the concrete again.

Step 4

Rinse the concrete thoroughly with cool water. 

Precaution Ensure Your Safety :

Step 1

Wear a respirator, eye mask, face mask and strong rubber gloves. Put on old clothing that fully covers your arms and legs. Wear socks and old shoes or boots; never go barefoot while working with muriatic acid.

Step 2

Keep a pressure washer right next to your work area in case of accidental spills. You might substitute a hose for the pressure washer, but only if it has strong water pressure. You'll also need the pressure to dilute and wash away the acid when you're finished.

Step 3

Protect other parts near your work area since muriatic acid can damage,  then cover these areas with a tarp.

Step 4

Keep flames, heat and sparks far away from the acid. Muriatic acid is not flammable, but it can form a flammable hydrogen gas if it comes into contact with metal.

For more details of the product refer this link . If you have any query regarding the product, please feel free to contact us on marinechemical @ gmail.com .