FREE SHIPPINGFree shipping on all orders over 100000 INR.

BITUMEN PAINT

0
No votes yet

Product Qty Per Unit: 
25.00
Product usage unit: 
Ltr.

Negotiate Price

Product Delivery Locations: 
Mumbai, JNPT, Nhava Seva, Pirpav Jetty, Ballard Pier, Mumbai Port Trust, Butcher Island, ONGC EMR Shed, MIdc, Pune, Maharastra
Generic Name: 
A multi purpose bituminous product supplied in a paint consistency. Applicable as an adhesive primer, coating or for tree surgery. Good water, acid and alkali resistance. Suitable for protection of galvanised iron gutters, downpipes, metal railings and
Product Description: 

A multi purpose bituminous product supplied in a paint consistency. Applicable as an adhesive primer, coating or for tree surgery.   Good water, acid and alkali resistance. Suitable for protection of galvanised iron gutters, downpipes, metal railings and metals exposed to weather, for priming dry concrete decks and as an adhesive to adhere Malthoid to metal.

Colour: Black
Dry Time: 6-8 Hours
Flashpoint: Flammable - Flash point 32oC min
Coverage:
As a paint/primer:
8m2/litre approx. on concrete
10m2/litre approx. on metal
As an adhesive for Malthoid:
5m2/litre approx.

Storage: May be stored in sealed containers under cover at normal temperatures for 12 months.

Product Application: 

BITUMEN PAINT conforms to BS3416: Type 1 Class A for the waterproofing and weather protecting of
steelwork, concrete and potable water tanks. BITUMEN PAINT is used for the protection of ferrous and non-ferrous metals, concrete roofing, felt, fiber cement, corrugated iron, asphalt and wood, against water. Drying Time Approximately 6 hours depending on drying conditions. A solvent-borne, bituminous black paint. When dry it forms an odorless and taint-free bitumen film.
BITUMEN PAINT is supplied ready for use and should not require thinning. Apply at least two coats by brush or spray allowing each coat to dry before applying the next coat. Note: At very low service temperatures the coating will become less flexible, while at high temperatures it becomes soft and less resistant to degradation by the environment, and will ultimately flow.

Product Procedure: 
Product Note: 
Product Technical Specification: 
  • Surfaces must be clean, dry and free from grease, oil, wax or any loose contaminating material.
  •  New metal surfaces should be allowed to weather for a minimum of three months prior to coating.
  •  Over rusted surfaces it is essential to remove loose rust or scale, wire brushing will do, prior to coating.

Appearance:

A thin black liquid, with

a strong solvent odor

Solids Content:

Above 35%

Dangerous Goods Class:

3

Poisons Schedule Number:

5

Product pack size: 
25 ltr., 210 ltr.
Product alias: 
<p> Black Bitumenous Paint</p>

BITUMEN PAINT manufacturer and supplier in Mumbai, Kandla, Kolkata, Chennai, Surat, Gandhidham, Paradip, Fujairah, Dubai, Ajman, Abudhabi, Sharjah, Gulf UAE, Muscat Oman, Ruwi, Barka, Nairobi, Kenya, Sudan, Yemen

Remarks: 
  • Not suitable for use or as waterproofing membrane/coating.
  •  Do not use in exposed situations, as U.V. rays can affect it. Therefore it must be overpainted with Ormonoid Silvershield.
  •  Precautions should be taken to avoid skin or eye contact or swallowing the product.
  • Splashes or other accidental skin contact should be washed off immediately.
  •  Wear safety glasses, overalls and impermeable gloves, e.g. PVC.
  •  For a full MSDS contact your Davco state offic
  • MUMBAI PORT NHAVA SEVASupply can be done within 1 Hour for BPT-Nhava.
  • Mumbai JNPT Ship Chandler50% Discount on every Marine chemical purchase.
  • Largest Marine CHEM SupplierStock Turbha, KANDLA, Vizag, Kolkata, Chennai.
  • Email Price, MSDS, Tech supportmarinechemical@gmail.com

Top Rated Products