FREE SHIPPINGFree shipping on all orders over 100000 INR.

AQUA Tuff High Foam conc.

0
No votes yet

Product Qty Per Unit: 
25.00
Product usage unit: 

Negotiate Price

Product Delivery Locations: 
Mumbai, JNPT, Nhava Seva, Pirpav Jetty, Ballard Pier, Mumbai Port Trust, Butcher Island, ONGC EMR Shed, MIdc, Pune, Maharastra
Category: 
Degreaser-10
Generic Name: 
Aquatuff High Foam alkaline Ship hold cleaning detergent
Very effective high foam alakaline cleaner for ship hold and general digressing. its heavy molecular surfactants rapidly reacts with water and produce effective cleaning solution . Suitable with hand spray and by high and low pressure washing machine
Product Description: 

Very effective emulsifier - based cleaner for use in hold cleaning and general degressing. its heavy molecular surfactants rapidly reacts with water and produce effective cleaning solution. May be applied by brush, hand spray and by high and low pressure washing machines.
It is a heavy duty non corrosive concentrated cleaning compound soluble in fresh and salt water , Also suitable with high pressure cleanig machines. Ideal for difficult cleaning problems faced in industrial and other plants,  Very effective degreaser which removes dirt, oil and grease from the equipment, parts, components, engines, floors and walls etc. 

Product Application: 

20-50 % with fresh water . Also acts as an acid-neutralizing agent for Boiler & Colling systems during cleaning & maintenance.
Heavy Soil deposition                   Use Undiluted from to 20-50% diluted with water. 
Medium soil deposition                 10-20%  diluted with water. 
Light Soil ( general degreasing )   5-10% diluted with water.

Product Procedure: 
Product Note: 
Product Technical Specification: 

Odour

Odourless

Appearance

Liquid, colourless to yellow, soluble in water

pH

Alkaline

Boiling point

>100 °C at 760 mm /Hg

Vapour pressure

not known

Vapour density

not applicable

Freezing point

5 °C at 760 mm/Hg

Solubility                                       Completely soluble in water

Specific gravity (water=1)

1.05

Flammable                                   Non combustible

 
Product pack size: 
20, 25, 50, 210 Ltrs. Discount is only applicable for purchase of more then 1 Cane. Ready stock at Mumbai, Surat, Navlakhi, Kandla, Mundra, Sikka, Vizag - Visakhapatnam, Gangavaram, Krishnapatnam, Chennai, Ennore, Kolkata - Ennore, Paradip, Fujairah, Dubai, Middle East - UAE
Product alias: 

Aquatuff High foam can be use as Ship hold cleaning agent, Alkaline Detergent, High Foam Cleaner, Cargo cleaning agent, Coal cleaning chemicals, Ship hold multi purpose clenaer. Effective detergent helps for preparation of cargo holds prior to loading, Aquatuff high foam is compatible with cargo hold cleaning equipment.

Aquatuff High Foam detergent classified as versatile hold cleaning chemicals, cargo hold washing liquid. As it is very effective cleaning chemical for cargo holds.

Aquatuff cleaner always helpfull as a multi purpsoe cargo hold cleaning chemicals also suitable cleaner for  necessary preparation prior to loading grain in bulk, hold cleaning after cement etc

cargo hold cleaning equipment
hold cleaning chemicals
cargo hold washing
cleaning of cargo holds
cargo hold preparation
necessary preparation prior to loading grain in bulk
hold cleaning after cement

3 Pieces of Good Advice:
Apply  AquaTuff on the dry surface where possible! A dry surface will absorb far better than a wet surface. When applying AquaTuff on vertical surfaces: Start application from the bottom and work upwards! If beginning from the top and going downwards, the AquaTuff may produce "channels" down the surface, thereby running too fast off the surface. During high-pressure cleaning: It is important that the rinsing water does not run over non-cleaned surfaces! The rinsing water can draw soap from the surface if running over non-cleaned surfaces. High pressure together with the optimum concentration of AquaTuff will give the best effect .

Directions for Use and Dose Rates:
General Cleaning:- AquaTuff can be used for all types of cleaning &  degreasing & may be applied by  Brush, Hand spray, high and low pressure washing machines etc. Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min. will suffice for   most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If the cleaning solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on degree of contamination AquaTuff should be mixed with warm water at a rate of 50-200 ml   per 10 litres. i.e. 1 cup of AquaTuff to a bucket of water. An aquatuff solution can be applied simply by mops, brushes or rags, or by dipping the soiled articles into the AquaTuff solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, AquaTuff is not recommended for washing machines.                        

Tank Cleaning:-Cargo tank cleaning to remove residues of Mineral, Animal, Vegetable or Fish oil, Waxes  &  Soot from inert gas systems.

Method of Application and Dose Rates:-

  • Direct injection method for tank washing machines. Dose rate 1-5 litres per ton wash water (0.1-0.5%).
  • Recirculation method. Dose rate 1-7 litres per ton wash water (0.1-0.7%).
  • Spot cleaning. Hand spray neat or diluted with up to 5 parts water and leave for several minutes before rinsing off with clean water.

Cleaning of Cargo Tanks to Remove Soot from Inert Gas Systems:-

  • Spray AquaTuff on with a high-pressure cleaning machine and use 1:6 with water. If used with the hand sprayer, spray the product neat onto the surface, allowing 1 lit. for every 12 m2. Use a 5-8% solution in a tank washing machine.
  • Leave for about 30-45 minutes. The surface should be kept wet.
  • Wash down with hot water (80°C) and check the cargo tank.
  • Repeat the procedure if necessary.

Note:- Whenever possible, the cleaning solution should be heated to 60-80°C.If this method is not possible, other conventional methods such as separate rate direct injection, recirculation or hand spraying provide acceptable options.For boiler fire side cleaning, a 10-20 % hot solution, (temp. above 40°C), should be sprayed on to the surfaces to be cleaned. Allow to penetrate for 20 minutes and flush off. For deposits which are very hard to remove, increase the concentration to 50% and repeat if necessary.

Articles: